Tek-Trol Flow Meters – Erik Prayoga

Tek-Trol 1100A-2-1-015A-1-S-150-1-E – Tek-Cor 1100A Coriolis Flow Meter, 0.5″, ± 0.5%, 150# ANSI Flange, Class I Div. I

Erik Prayoga — Mon, 22 Jun 2026 11:18:12 +0000

Tek-Trol 1100A-2-1-015A-1-S-150-1-E – Our range of Coriolis mass flow meters is designed to suit your need to measure almost any fluid, across any application. Built on the Coriolis principle, these meters measure the mass of the fluids directly, rather than volume. This means they do not require compensations for factors such as temperature and pressure which impact volume and in turn, impact the accuracy of measurement.

Specifications

Manufacturer	Tek-Trol
(Instrument-Sensor) Size	0.5"
(Instrument-Sensor) Output Signal Range	4 – 20 mAmp
(Instrument-Sensor) Measurement Accuracy	0.50%
Component	Coriolis Flow Meter
(Instrument-Sensor) Output Signal Type	Pulse
(Instrument-Sensor) Hazardous Location Class	Class I Div. I
(Instrument-Sensor) Medium	Liquids
(Instrument-Sensor) Medium	Gases
(Instrument – Sensor) Supply Voltage	18 – 28 VDC

Features

Suitable for aggressive and contaminated media.

Measurement and Display of percent water-cut for oil or water mixtures.

High Phase Shift Frequency.

Measuring tubes vibrated at natural frequency.

Short response time.

No moving parts.

Full Sensor Diagnostics.

Measures mass flow, density, temperature, and volume flow with high accuracy.

OLED with 2 line display.

Multiple Flange (150# To 900#) and Process Connections.

Net Oil Measurement.

Density accuracy upto 0.001 g/cm3 (Consult Factory for better).

Suitable for harsh conditions.

Process Temp Ranges From -200 to 300°F.

Ul Class I Div I and NTEP Approved.

Certified for use in Fiscal and Custody Transfer Applications.

Tek-Trol 1620A-0050-C-09-B-03-C0-D-00-03-A-XX-A-01-A – Tek-DP 1620A Cone Flow Meter, 304L Stainless Steel, 2″, ± 0.5%, #600 ANSI Raised Face Weld Neck

Erik Prayoga — Mon, 22 Jun 2026 11:18:11 +0000

Tek-Trol 1620A-0050-C-09-B-03-C0-D-00-03-A-XX-A-01-A – Tek-DP 1620A Cone Flow Meter is an advanced differential pressure instrument, which is ideal for use with liquid, steam, gas media in rugged conditions where accuracy, low maintenance, cost are important. With its DP built-in flow conditioning design, the Cone is especially useful in tight-fit and retrofit installations in which the long runs of straight pipe required by Orifice Plates, Venturi Tubes, and other technologies are either impractical or unavailable.

Specifications

Manufacturer	Tek-Trol
(Instrument-Sensor) Size	2"
Component	Cone Flow Meter
(Instrument-Sensor) Measurement Accuracy	0.75%

Features

Accuracy up to ±0.5% of flow rate.

Suitable for 2” to 48” with flanges rating from #150 to #2500 as per ASME.

Simple, robust and reliable.

Extremely immune to flow disturbances.

Eliminates straight run requirements.

Minimize metering footprint and reduce weight.

Maximum installation flexibility.

Low cost and minimal maintenance.

Suitable for difficult or severe applications.

High repeatability.

Full optional verification system ‘PrognosisTM’ available.

Tek-Trol 1620A-0150-D-09-B-03-C0-D-00-03-A-XX-A-01-A – Tek-DP 1620A Cone Flow Meter, 316 Stainless Steel, 6″, ± 0.5%, #600 ANSI Raised Face Weld Neck

Erik Prayoga — Mon, 22 Jun 2026 11:18:11 +0000

Tek-Trol 1620A-0150-D-09-B-03-C0-D-00-03-A-XX-A-01-A – Tek-DP 1620A Cone Flow Meter is an advanced differential pressure instrument, which is ideal for use with liquid, steam, gas media in rugged conditions where accuracy, low maintenance, cost are important. With its DP built-in flow conditioning design, the Cone is especially useful in tight-fit and retrofit installations in which the long runs of straight pipe required by Orifice Plates, Venturi Tubes, and other technologies are either impractical or unavailable.

Specifications

Manufacturer	Tek-Trol
(Instrument-Sensor) Measurement Accuracy	0.60%
(Instrument-Sensor) Size	6"
Component	Cone Flow Meter

Features

Accuracy up to ±0.5% of flow rate.

Suitable for 2” to 48” with flanges rating from #150 to #2500 as per ASME.

Simple, robust and reliable.

Extremely immune to flow disturbances.

Eliminates straight run requirements.

Minimize metering footprint and reduce weight.

Maximum installation flexibility.

Low cost and minimal maintenance.

Suitable for difficult or severe applications.

High repeatability.

Full optional verification system ‘PrognosisTM’ available.

Tek-Trol 1620A-0080-C-01-B-02-C0-D-00-03-A-XX-A-01-A – Tek-DP 1620A Cone Flow Meter, 304L Stainless Steel, 3″, ± 0.5%, #300 ANSI Raised Face Weld Neck

Erik Prayoga — Mon, 22 Jun 2026 11:18:10 +0000

Tek-Trol 1620A-0080-C-01-B-02-C0-D-00-03-A-XX-A-01-A – Tek-DP 1620A Cone Flow Meter is an advanced differential pressure instrument, which is ideal for use with liquid, steam, gas media in rugged conditions where accuracy, low maintenance, cost are important. With its DP built-in flow conditioning design, the Cone is especially useful in tight-fit and retrofit installations in which the long runs of straight pipe required by Orifice Plates, Venturi Tubes, and other technologies are either impractical or unavailable.

Specifications

Manufacturer	Tek-Trol
(Instrument-Sensor) Size	3"
Component	Cone Flow Meter
(Instrument-Sensor) Measurement Accuracy	0.75%

Features

Accuracy up to ±0.5% of flow rate.

Suitable for 2” to 48” with flanges rating from #150 to #2500 as per ASME.

Simple, robust and reliable.

Extremely immune to flow disturbances.

Eliminates straight run requirements.

Minimize metering footprint and reduce weight.

Maximum installation flexibility.

Low cost and minimal maintenance.

Suitable for difficult or severe applications.

High repeatability.

Full optional verification system ‘PrognosisTM’ available.

Tek-Trol 1400A-250-1-I-HC-1-1-T – Tek-Flux 1400A Electromagnetic Flow Meter, 10″, ± 0.5%, 150# ANSI Flange,

Erik Prayoga — Mon, 22 Jun 2026 11:18:07 +0000

Tek-Trol 1400A-250-1-I-HC-1-1-T – Tek-Flux 1400A Electromagnetic flow meter, also called Magmeters, it is a contact instrument used for measuring the volumetric flowrates of any fluid which can adequately conduct electricity in closed pipelines. These instruments are highly accurate, reliable, and stable devices that are used in various high-pressure industrial processes. Tek-Flux 1400A flow meter operates on the basis of Faraday’s Law of Induction. According to this principle, any change in the magnetic flux, linked to an electric circuit, causes an electromotive force (or voltage) to be induced in this circuit. The induced voltage is therefore directly proportional to the rate of change of magnetic flux with time. It can measure highly corrosive mediums such as concentrated acid and concentrated alkaline using PTFE lining material. By using Titanium electrodes, we can measure seawater, various chloride, and hypo-chloride fluids

Specifications

Manufacturer	Tek-Trol
(Instrument-Sensor) Output Signal Range	4 – 20 mAmp
(Instrument-Sensor) Measurement Accuracy	0.50%
Component	Electromagnetic Flow Meter
(Instrument-Sensor) Size	10"
(Instrument – Sensor) Supply Voltage	18 – 36 VDC

Features

Wide range of nominal diameter Size ½” to 28″ (0.04 ft to 2.33 ft) with IP65 protection.

Easy maintenance due to no moving parts.

Uninfluenced by temperature, pressure, viscosity, and density.

Used for wide application, can measure conductive fluid, without reference to fibre, solid or suspending material contained in liquid.

High turndown ratio up to 1:100.

It features high intelligence, with back light LCD display, menu setting control, three grades password

protection, two-way measuring, slight signal removal, auto flow compensation, and other function.

Features high intelligence, which ensure empty pipe detection, self-detection, self-diagnostic functions,

and safety alarms for upper and lower limit.

Features SMART excitation, which ensures zero-point stability, high reliability, and low power consumption.

Lining and electrode available in various materials which can measure nearly all conductive fluids.

It has multiple signal output, pulse or Modbus RS485 or HART® or 4 to 20 mA.

The power supply system has good voltage vibration ability.

Meters batching and blending totalization.

Tek-Trol 1650A-F-G-300-S-01-A-02-A-B-O-01 – Tek-DP 1650A Self-Averaging Flow Meter, 316 Stainless Steel, 12″, ± 1%, #150 ANSI

Erik Prayoga — Mon, 22 Jun 2026 11:18:07 +0000

Tek-Trol 1650A-F-G-300-S-01-A-02-A-B-O-01 – The Tek-DP 1650A DProbar is a multiport self-averaging flow meter (SAFM). Its classical and modern proven design is associated with averaging pitot tubes for clean process fluid measurement applications. It is a primary flow meter for measuring gas, liquid and vapors flowing in the pipelines and ducts based on principles of differential pressure measurement (DP). The diamond-shaped multiport design is available with identical up and downstream ports for bi-directional flow measurement applications.

Specifications

Manufacturer	Tek-Trol
(Instrument-Sensor) Measurement Accuracy	0.60%
(Instrument-Sensor) Size	12"
Component	Self-Averaging Flow Meter
(Instrument-Sensor) Medium	Gases

Features

No Moving

Velocity Sampled at several points to provide average flow rate.

Accuracy up to ≤ 5 +/- 1.0% of the actual flow rate.

Repeatability 0.1%.

Unique diamond profile shape proven to offer good flow separation.

High flow turndown.

Easy to install and Cost Effective.

Stable flow co-efficient (K).

Highly durable and stable.

Diamond Bar design ensures optimum strength.

Low permanent pressure loss.

Multiport Averaging: Improved performance with asymmetric flow profiles.

Suitable for wide range of pipe sizes.

Allows insertion into pressurized pipes (Via a full port valve and hot tap).

Eliminates imposed piping between the primary element and DP transmitter.

Available for all pipe sizes and in a wide range of materials.

Tek-Trol 1100A-2-1-015B-1-S-150-1-E – Tek-Cor 1100A Coriolis Flow Meter, 0.5″, ± 0.2%, 150# ANSI Flange, Class I Div. I

Erik Prayoga — Mon, 22 Jun 2026 11:18:06 +0000

Tek-Trol 1100A-2-1-015B-1-S-150-1-E – Our range of Coriolis mass flow meters is designed to suit your need to measure almost any fluid, across any application. Built on the Coriolis principle, these meters measure the mass of the fluids directly, rather than volume. This means they do not require compensations for factors such as temperature and pressure which impact volume and in turn, impact the accuracy of measurement.

Specifications

Manufacturer	Tek-Trol
(Instrument-Sensor) Size	0.5"
(Instrument-Sensor) Output Signal Range	4 – 20 mAmp
(Instrument-Sensor) Measurement Accuracy	0.20%
Component	Coriolis Flow Meter
(Instrument-Sensor) Output Signal Type	Pulse
(Instrument-Sensor) Hazardous Location Class	Class I Div. I
(Instrument-Sensor) Medium	Liquids
(Instrument-Sensor) Medium	Gases
(Instrument – Sensor) Supply Voltage	18 – 28 VDC

Features

Suitable for aggressive and contaminated media.

Measurement and Display of percent water-cut for oil or water mixtures.

High Phase Shift Frequency.

Measuring tubes vibrated at natural frequency.

Short response time.

No moving parts.

Full Sensor Diagnostics.

Measures mass flow, density, temperature, and volume flow with high accuracy.

OLED with 2 line display.

Multiple Flange (150# To 900#) and Process Connections.

Net Oil Measurement.

Density accuracy upto 0.001 g/cm3 (Consult Factory for better).

Suitable for harsh conditions.

Process Temp Ranges From -200 to 300°F.

Ul Class I Div I and NTEP Approved.

Certified for use in Fiscal and Custody Transfer Applications.

Tek-Trol 1400A-300-1-I-SS-1-1-H – Tek-Flux 1400A Electromagnetic Flow Meter, 300″, ± 0.5%, 150# ANSI Flange,

Erik Prayoga — Mon, 22 Jun 2026 11:18:06 +0000

Tek-Trol 1400A-300-1-I-SS-1-1-H – Tek-Flux 1400A Electromagnetic flow meter, also called Magmeters, it is a contact instrument used for measuring the volumetric flowrates of any fluid which can adequately conduct electricity in closed pipelines. These instruments are highly accurate, reliable, and stable devices that are used in various high-pressure industrial processes. Tek-Flux 1400A flow meter operates on the basis of Faraday’s Law of Induction. According to this principle, any change in the magnetic flux, linked to an electric circuit, causes an electromotive force (or voltage) to be induced in this circuit. The induced voltage is therefore directly proportional to the rate of change of magnetic flux with time. It can measure highly corrosive mediums such as concentrated acid and concentrated alkaline using PTFE lining material. By using Titanium electrodes, we can measure seawater, various chloride, and hypo-chloride fluids

Specifications

Manufacturer	Tek-Trol
(Instrument-Sensor) Output Signal Range	4 – 20 mAmp
(Instrument-Sensor) Measurement Accuracy	0.50%
Component	Electromagnetic Flow Meter
(Instrument-Sensor) Size	300"
(Instrument – Sensor) Supply Voltage	18 – 36 VDC

Features

Wide range of nominal diameter Size ½” to 28″ (0.04 ft to 2.33 ft) with IP65 protection.

Easy maintenance due to no moving parts.

Uninfluenced by temperature, pressure, viscosity, and density.

Used for wide application, can measure conductive fluid, without reference to fibre, solid or suspending material contained in liquid.

High turndown ratio up to 1:100.

It features high intelligence, with back light LCD display, menu setting control, three grades password

protection, two-way measuring, slight signal removal, auto flow compensation, and other function.

Features high intelligence, which ensure empty pipe detection, self-detection, self-diagnostic functions,

and safety alarms for upper and lower limit.

Features SMART excitation, which ensures zero-point stability, high reliability, and low power consumption.

Lining and electrode available in various materials which can measure nearly all conductive fluids.

It has multiple signal output, pulse or Modbus RS485 or HART® or 4 to 20 mA.

The power supply system has good voltage vibration ability.

Meters batching and blending totalization.

Tek-Trol 1650A-F-G-450-S-01-A-02-A-B-O-01 – Tek-DP 1650A Self-Averaging Flow Meter, 316 Stainless Steel, 18″, ± 1%, #150 ANSI

Erik Prayoga — Mon, 22 Jun 2026 11:18:05 +0000

Tek-Trol 1650A-F-G-450-S-01-A-02-A-B-O-01 – The Tek-DP 1650A DProbar is a multiport self-averaging flow meter (SAFM). Its classical and modern proven design is associated with averaging pitot tubes for clean process fluid measurement applications. It is a primary flow meter for measuring gas, liquid and vapors flowing in the pipelines and ducts based on principles of differential pressure measurement (DP). The diamond-shaped multiport design is available with identical up and downstream ports for bi-directional flow measurement applications.

Specifications

Manufacturer	Tek-Trol
(Instrument-Sensor) Measurement Accuracy	0.60%
(Instrument-Sensor) Size	18"
Component	Self-Averaging Flow Meter
(Instrument-Sensor) Medium	Gases

Features

No Moving

Velocity Sampled at several points to provide average flow rate.

Accuracy up to ≤ 5 +/- 1.0% of the actual flow rate.

Repeatability 0.1%.

Unique diamond profile shape proven to offer good flow separation.

High flow turndown.

Easy to install and Cost Effective.

Stable flow co-efficient (K).

Highly durable and stable.

Diamond Bar design ensures optimum strength.

Low permanent pressure loss.

Multiport Averaging: Improved performance with asymmetric flow profiles.

Suitable for wide range of pipe sizes.

Allows insertion into pressurized pipes (Via a full port valve and hot tap).

Eliminates imposed piping between the primary element and DP transmitter.

Available for all pipe sizes and in a wide range of materials.

Tek-Trol 1400A-300-1-I-HC-1-1-T – Tek-Flux 1400A Electromagnetic Flow Meter, 300″, ± 0.5%, 150# ANSI Flange,

Erik Prayoga — Mon, 22 Jun 2026 11:18:05 +0000

Tek-Trol 1400A-300-1-I-HC-1-1-T – Tek-Flux 1400A Electromagnetic flow meter, also called Magmeters, it is a contact instrument used for measuring the volumetric flowrates of any fluid which can adequately conduct electricity in closed pipelines. These instruments are highly accurate, reliable, and stable devices that are used in various high-pressure industrial processes. Tek-Flux 1400A flow meter operates on the basis of Faraday’s Law of Induction. According to this principle, any change in the magnetic flux, linked to an electric circuit, causes an electromotive force (or voltage) to be induced in this circuit. The induced voltage is therefore directly proportional to the rate of change of magnetic flux with time. It can measure highly corrosive mediums such as concentrated acid and concentrated alkaline using PTFE lining material. By using Titanium electrodes, we can measure seawater, various chloride, and hypo-chloride fluids

Specifications

Manufacturer	Tek-Trol
(Instrument-Sensor) Output Signal Range	4 – 20 mAmp
(Instrument-Sensor) Measurement Accuracy	0.50%
Component	Electromagnetic Flow Meter
(Instrument-Sensor) Size	300"
(Instrument – Sensor) Supply Voltage	18 – 36 VDC

Features

Wide range of nominal diameter Size ½” to 28″ (0.04 ft to 2.33 ft) with IP65 protection.

Easy maintenance due to no moving parts.

Uninfluenced by temperature, pressure, viscosity, and density.

Used for wide application, can measure conductive fluid, without reference to fibre, solid or suspending material contained in liquid.

High turndown ratio up to 1:100.

It features high intelligence, with back light LCD display, menu setting control, three grades password

protection, two-way measuring, slight signal removal, auto flow compensation, and other function.

Features high intelligence, which ensure empty pipe detection, self-detection, self-diagnostic functions,

and safety alarms for upper and lower limit.

Features SMART excitation, which ensures zero-point stability, high reliability, and low power consumption.

Lining and electrode available in various materials which can measure nearly all conductive fluids.

It has multiple signal output, pulse or Modbus RS485 or HART® or 4 to 20 mA.

The power supply system has good voltage vibration ability.

Meters batching and blending totalization.