Submersible Level Transmitters – Erik Prayoga

Dwyer Mercoid PBLT2-20-60 Submersible Level Transmitter

Erik Prayoga — Mon, 22 Jun 2026 17:51:53 +0000

Dwyer Mercoid PBLT2-20-60 Submersible Level Transmitter Series SBLTX Dirty Liquid Submersible Level Transmitter. Built in Lightning Protection. Perfect for Sludge and Slurries. Dirty Application Submersible Level Transmitter for dirty applications like wastewater and slurry applications. Recommended Accessories: A-625 Cable Hanger, A-297 Dessicant Filter.

Specifications

Component	Submersible Level Transmitter
(Instrument-Sensor) Size	3.4375"
(Instrument-Sensor) Type	Protective Cage
(Instrument-Sensor) Output Signal Type	4-20 Ma 2 Wire (Loop Powered)
(Instrument-Sensor) Measurement Accuracy	0.25%
(Instrument-Sensor) Application	Dirty Liquids
(Instrument-Sensor) Span	46'
(Instrument-Sensor) Temperature Range	0 °F – 200 °F
Manufacturer	Dwyer Instruments
(Instrument – Sensor) Supply Voltage	12 VDC
(Instrument – Sensor) Supply Voltage	24 VDC

Features

Meet application requirements with durable cage design with large diameter 316 SS diaphragm seal that is non-clogging and damage resistant to floating solids

Increased life with lightning and surge protection utilizing dual arrestor technology, grounded to case, eliminating both power supply surges and lightning ground strike transients (surge protection is not guaranteed and is not covered by warranty) on PBLT2 models

Eliminates particulate or water droplets from entering the transducer using maintenance-free filter

Peace of mind with UL approved intrinsically safe on PBLTX models for use in hazardous locations when used with proper barrier

Decrease ownership cost with durable, 270 lb tensile strength shielded and vented cable and excellent chemical compatibility

Flexible installation options with NPT connection to rigidly install in a pipe/conduit or use a A-625 hanging loop to attach a chain to remove from the installation

Minimal downtime with standard 72 hour lead time

Dwyer PBLT2-5-60 Submersible Level Transmitter

Erik Prayoga — Mon, 22 Jun 2026 17:51:52 +0000

Dwyer PBLT2-5-60 is a submersible level transmitter with a temperature range of 0 to 200°F (-18 to 93°C). It offers an accuracy of ±0.25% FS and operates on a power requirement of 13 to 30 VDC. With an IP68 enclosure rating and a response time of 50 msec, this transmitter is designed for use in hazardous locations. The output signal is 4 to 20 mA DC, and it is suitable for measuring compatible liquids. The wetted materials include 316 SS and 316L SS for the body, with polyether polyurethane or ETFE for the cable and fluoroelastomer seals. It has a pressure limit of 2X FS and a thermal effect of ±0.02% FS/°F. The electrical connections are wire pigtail, and the loop resistance is 900 Ω.

Specifications

Component	Submersible Level Transmitter
(Instrument-Sensor) Measurement Accuracy	0.25%
(Instrument-Sensor) IP Protection	IP68
(Instrument-Sensor) Application	Liquid
Manufacturer	Dwyer Instruments
(Instrument – Sensor) Supply Voltage	10 – 28 VDC
(Instrument – Sensor) Supply Voltage	13 – 30 VDC
(Instrument-Sensor) Temperature Range	-4 – 176 °F/-20 – 80°C
(Instrument-Sensor) Temperature Range	0 – 200 °F/-18 – 93°C
(Instrument-Sensor) Temperature Range	-4 – 149 °F/-20 – 65°C

Features

Meet application requirements with durable cage design with large diameter 316 SS diaphragm seal that is non-clogging and damage resistant to floating solids

Eliminates particulate or water droplets from entering the transducer using maintenance-free filter

Peace of mind with UL approved intrinsically safe on PBLTX models for use in hazardous locations when used with proper barrier

Decrease ownership cost with durable, 270 lb tensile strength shielded and vented cable and excellent chemical compatibility

Flexible installation options with NPT connection to rigidly install in a pipe/conduit or use a A-625 hanging loop to attach a chain to remove from the installation

Minimal downtime with standard 72 hour lead time

Dwyer Mercoid PBLT2-15-60 Submersible Level Transmitter

Erik Prayoga — Mon, 22 Jun 2026 17:51:52 +0000

Dwyer Mercoid PBLT2-15-60 Submersible Level Transmitter Series SBLTX Dirty Liquid Submersible Level Transmitter. Built in Lightning Protection. Perfect for Sludge and Slurries. Dirty Application Submersible Level Transmitter for dirty applications like wastewater and slurry applications. Recommended Accessories: A-625 Cable Hanger, A-297 Dessicant Filter.

Specifications

Component	Submersible Level Transmitter
(Instrument-Sensor) Size	3.4375"
(Instrument-Sensor) Type	Protective Cage
(Instrument-Sensor) Output Signal Type	4-20 Ma 2 Wire (Loop Powered)
(Instrument-Sensor) Measurement Accuracy	0.25%
(Instrument-Sensor) Application	Dirty Liquids
(Instrument-Sensor) Span	34'
(Instrument-Sensor) Temperature Range	0 °F – 200 °F
Manufacturer	Dwyer Instruments
(Instrument – Sensor) Supply Voltage	12 VDC
(Instrument – Sensor) Supply Voltage	24 VDC

Features

Meet application requirements with durable cage design with large diameter 316 SS diaphragm seal that is non-clogging and damage resistant to floating solids

Eliminates particulate or water droplets from entering the transducer using maintenance-free filter

Peace of mind with UL approved intrinsically safe on PBLTX models for use in hazardous locations when used with proper barrier

Decrease ownership cost with durable, 270 lb tensile strength shielded and vented cable and excellent chemical compatibility

Flexible installation options with NPT connection to rigidly install in a pipe/conduit or use a A-625 hanging loop to attach a chain to remove from the installation

Minimal downtime with standard 72 hour lead time

Dwyer Mercoid FBLT-2SC-IVEF-30-50 Submersible Level Transmitter

Erik Prayoga — Mon, 22 Jun 2026 17:51:51 +0000

Dwyer Mercoid FBLT-2SC-IVEF-30-50 Submersible Level Transmitter Series FBLT Flush Tip Diaphram Submersible Level Transmitter. Perfect for dirty applications like Sludge and Slurries. Flush, non-clogging diaphragm great for dirty applications. Vent has maintenance free filter to prevent particalate or water drops from entering transmitter. Recommended Accessories: A-297 Dessicant Filter.

Specifications

Component	Submersible Level Transmitter
(Instrument-Sensor) Output Signal Type	4-20 Ma 2 Wire (Loop Powered)
(Instrument-Sensor) Measurement Accuracy	0.25%
(Instrument-Sensor) Application	Dirty Liquids
(Instrument-Sensor) Type	Bullet Nose
(Instrument-Sensor) Type	Slim Bore
(Instrument-Sensor) Size	1.1875"
(Instrument-Sensor) Span	69'
Manufacturer	Dwyer Instruments
(Instrument – Sensor) Supply Voltage	12 VDC
(Instrument – Sensor) Supply Voltage	24 VDC
(Instrument-Sensor) Temperature Range	-4 °F – 176 °F

Features

Long operating life with a non-clog flush diaphragm tip for harsh applications

Eliminates particulate or water droplets from entering the transducer using maintenance-free filter

Suits harsh environments with choice of polyether polyurethane or ETFE cable materials for excellent chemical compatibility

Meet application requirements with narrow body design allows the FBLT to fit into stilling wells and narrow installations

Unit holds up in aggressive fluids with robust FKM fluoroelastomer diaphragm that is PTFE coated for a stick-resistant surface

Avoid product leaks typically cause by oil or grease with diaphragm cavity that is filled with gel

Flexible installation options with NPT connection to rigidly install in a pipe/conduit or use the A-625 hanging loop to attach a chain to remove from the installation

Dwyer PBLT2-10-60 Submersible Level Transmitter

Erik Prayoga — Mon, 22 Jun 2026 17:51:51 +0000

Dwyer PBLT2-10-60 is a submersible level transmitter with a temperature range of 0 to 200°F. It offers ±0.25% FS accuracy, 50 msec response time, and an IP68 enclosure rating. With 4-20 mA DC output, it is ideal for measuring compatible liquids in hazardous locations.

Specifications

Component	Submersible Level Transmitter
(Instrument-Sensor) Measurement Accuracy	0.25%
(Instrument-Sensor) IP Protection	IP68
(Instrument-Sensor) Application	Liquid
Manufacturer	Dwyer Instruments
(Instrument – Sensor) Supply Voltage	10 – 28 VDC
(Instrument – Sensor) Supply Voltage	13 – 30 VDC
(Instrument-Sensor) Temperature Range	-4 – 176 °F/-20 – 80°C
(Instrument-Sensor) Temperature Range	0 – 200 °F/-18 – 93°C
(Instrument-Sensor) Temperature Range	-4 – 149 °F/-20 – 65°C

Features

Meet application requirements with durable cage design with large diameter 316 SS diaphragm seal that is non-clogging and damage resistant to floating solids

Eliminates particulate or water droplets from entering the transducer using maintenance-free filter

Peace of mind with UL approved intrinsically safe on PBLTX models for use in hazardous locations when used with proper barrier

Decrease ownership cost with durable, 270 lb tensile strength shielded and vented cable and excellent chemical compatibility

Flexible installation options with NPT connection to rigidly install in a pipe/conduit or use a A-625 hanging loop to attach a chain to remove from the installation

Minimal downtime with standard 72 hour lead time

Dwyer Mercoid MBLT-2SC-IVPF-200-220 Submersible Level Transmitter

Erik Prayoga — Mon, 22 Jun 2026 17:51:50 +0000

Dwyer Mercoid MBLT-2SC-IVPF-200-220 Submersible Level Transmitter Series MBLT Miniature Submersible Level Transmitter. Slim Bore only 0.63" in Diameter. Slim design great for tight boreholes and well applications. Submersible Level Transmitter for Clean Applications. Vent has maintenance free filter to prevent particalate or water drops from entering transmitter. Recommended Accessories: A-297 Dessicant Filter.

Specifications

Component	Submersible Level Transmitter
(Instrument-Sensor) Output Signal Type	4-20 Ma 2 Wire (Loop Powered)
(Instrument-Sensor) Type	Bullet Nose
(Instrument-Sensor) Type	Slim Bore
(Instrument-Sensor) Application	Clean Liquids
(Instrument-Sensor) Span	150'
(Instrument-Sensor) Measurement Accuracy	0.10%
(Instrument-Sensor) Size	0.63"
Manufacturer	Dwyer Instruments
(Instrument – Sensor) Supply Voltage	12 VDC
(Instrument – Sensor) Supply Voltage	24 VDC
(Instrument-Sensor) Temperature Range	-4 °F – 176 °F

Features

Slender 0.63˝ (16 mm) diameter design fits in narrow openings

Constructed for years of trouble free service with welded 316 SS body and 316 SS nose cap

Body top is 316 SS and tapered to prevent damage or snares when pulling the unit out of the installation

Low power voltage output models are ideal for remote level monitoring with rechargeable battery and solar panel

Maintenance free filter on vent tube eliminates particulate water droplets from entering the transducer

Incorporates lightning and surge protection, eliminating both power supply surges and lightning ground strike transients

Dwyer PBLT2-15-80 Submersible Level Transmitter

Erik Prayoga — Mon, 22 Jun 2026 17:51:48 +0000

Dwyer PBLT2-15-80 is a submersible level transmitter suitable for hazardous locations. It has a temperature range of 0 to 200°F (-18 to 93°C) and a ±0.25% FS accuracy. The transmitter operates on a power supply of 13 to 30 VDC and has a quick response time of 50 msec. It features an IP68 enclosure rating and offers a 4 to 20 mA DC output signal. The unit is designed to be suspended in the tank below the level being measured and is compatible with various liquids. The wetted materials include 316 SS, 316L SS, and fluoroelastomer seals. The pressure limit is 2X FS, and the thermal effect is ±0.02% FS/°F. The transmitter is protected against lightning and surges (PBLT2) and has a loop resistance of 900 Ω.

Specifications

Component	Submersible Level Transmitter
(Instrument-Sensor) Measurement Accuracy	0.25%
(Instrument-Sensor) IP Protection	IP68
(Instrument-Sensor) Application	Liquid
Manufacturer	Dwyer Instruments
(Instrument – Sensor) Supply Voltage	10 – 28 VDC
(Instrument – Sensor) Supply Voltage	13 – 30 VDC
(Instrument-Sensor) Temperature Range	-4 – 176 °F/-20 – 80°C
(Instrument-Sensor) Temperature Range	0 – 200 °F/-18 – 93°C
(Instrument-Sensor) Temperature Range	-4 – 149 °F/-20 – 65°C

Features

Meet application requirements with durable cage design with large diameter 316 SS diaphragm seal that is non-clogging and damage resistant to floating solids

Eliminates particulate or water droplets from entering the transducer using maintenance-free filter

Peace of mind with UL approved intrinsically safe on PBLTX models for use in hazardous locations when used with proper barrier

Decrease ownership cost with durable, 270 lb tensile strength shielded and vented cable and excellent chemical compatibility

Flexible installation options with NPT connection to rigidly install in a pipe/conduit or use a A-625 hanging loop to attach a chain to remove from the installation

Minimal downtime with standard 72 hour lead time

Dwyer PBLT2-10-80 Submersible Level Transmitter

Erik Prayoga — Mon, 22 Jun 2026 17:51:48 +0000

Dwyer PBLT2-10-80 is a submersible level transmitter suitable for measuring liquid levels. It has a temperature range of 0 to 200°F and an accuracy of ±0.25% FS. The transmitter operates on a power requirement of 13 to 30 VDC and has a quick response time of 50 msec. It is encased in an IP68 rated enclosure and features a 4 to 20 mA DC output signal. The transmitter is designed for suspended mounting in tanks and is made from 316 SS and 316L SS body materials with polyether polyurethane or ETFE cable and fluoroelastomer seals. It can withstand a pressure limit of 2X FS and is suitable for hazardous locations. The thermal effect is ±0.02% FS/°F and has a loop resistance of 900 Ω. The PBLT2-10-80 is equipped with lightning and surge protection for electrical safety.

Specifications

Component	Submersible Level Transmitter
(Instrument-Sensor) Measurement Accuracy	0.25%
(Instrument-Sensor) IP Protection	IP68
(Instrument-Sensor) Application	Liquid
Manufacturer	Dwyer Instruments
(Instrument – Sensor) Supply Voltage	10 – 28 VDC
(Instrument – Sensor) Supply Voltage	13 – 30 VDC
(Instrument-Sensor) Temperature Range	-4 – 176 °F/-20 – 80°C
(Instrument-Sensor) Temperature Range	0 – 200 °F/-18 – 93°C
(Instrument-Sensor) Temperature Range	-4 – 149 °F/-20 – 65°C

Features

Meet application requirements with durable cage design with large diameter 316 SS diaphragm seal that is non-clogging and damage resistant to floating solids

Eliminates particulate or water droplets from entering the transducer using maintenance-free filter

Peace of mind with UL approved intrinsically safe on PBLTX models for use in hazardous locations when used with proper barrier

Decrease ownership cost with durable, 270 lb tensile strength shielded and vented cable and excellent chemical compatibility

Flexible installation options with NPT connection to rigidly install in a pipe/conduit or use a A-625 hanging loop to attach a chain to remove from the installation

Minimal downtime with standard 72 hour lead time

Dwyer MBLT-2SB-IVPF-150-170 Miniature Submersible Level Transmitter

Erik Prayoga — Mon, 22 Jun 2026 17:51:48 +0000

Dwyer MBLT-2SB-IVPF-150-170 is a miniature submersible level transmitter suitable for monitoring compatible liquids. It has a temperature range of -4 to 176°F, with an accuracy of ±0.25% or ±0.10% FS. Its power requirement is 10 to 33 VDC for current output and 8 to 33 VDC for voltage output. It offers a fast response time of under 50 ms and features a 4 to 20 mA DC 2-wire output signal. With a pressure limit of 2x FS, it can withstand harsh conditions. The compact transmitter is easy to mount and comes with surge and lightning protection for enhanced durability.

Specifications

(Instrument-Sensor) Measurement Accuracy	0.25%
(Instrument-Sensor) Application	Liquid
Component	Miniature Submersible Level Transmitter
Manufacturer	Dwyer Instruments
(Instrument – Sensor) Supply Voltage	10 – 33 VDC
(Instrument – Sensor) Supply Voltage	8 – 33 VDC
(Instrument-Sensor) Temperature Range	-4 – 176 °F/-20 – 80°C

Features

Slender 0.63˝ (16 mm) diameter design fits in narrow openings

Constructed for years of trouble free service with welded 316 SS body and 316 SS nose cap

Body top is 316 SS and tapered to prevent damage or snares when pulling the unit out of the installation

Low power voltage output models are ideal for remote level monitoring with rechargeable battery and solar panel

Maintenance free filter on vent tube eliminates particulate water droplets from entering the transducer

Incorporates lightning and surge protection, eliminating both power supply surges and lightning ground strike transients

Dwyer Mercoid PBLTX-15-60 Submersible Level Transmitter

Erik Prayoga — Mon, 22 Jun 2026 17:51:47 +0000

Dwyer Mercoid PBLTX-15-60 Submersible Level Transmitter Series SBLTX Dirty Liquid Submersible Level Transmitter. Class 1 Div 1 intrinsically safe. Perfect for Sludge and Slurries. Dirty Application Submersible Level Transmitter for dirty applications like wastewater and slurry applications. Recommended Accessories: A-625 Cable Hanger, A-297 Dessicant Filter.

Specifications

Component	Submersible Level Transmitter
(Instrument-Sensor) Size	3.4375"
(Instrument-Sensor) Type	Protective Cage
(Instrument-Sensor) Output Signal Type	4-20 Ma 2 Wire (Loop Powered)
(Instrument-Sensor) Measurement Accuracy	0.25%
(Instrument-Sensor) Application	Dirty Liquids
(Instrument-Sensor) Span	34'
Manufacturer	Dwyer Instruments
(Instrument-Sensor) Hazardous Location Class	Class I Div. I Intrinsically Safe
(Instrument – Sensor) Supply Voltage	12 VDC
(Instrument – Sensor) Supply Voltage	24 VDC
(Instrument-Sensor) Temperature Range	0 °F – 176 °F

Features

Meet application requirements with durable cage design with large diameter 316 SS diaphragm seal that is non-clogging and damage resistant to floating solids

Eliminates particulate or water droplets from entering the transducer using maintenance-free filter

Peace of mind with UL approved intrinsically safe on PBLTX models for use in hazardous locations when used with proper barrier

Decrease ownership cost with durable, 270 lb tensile strength shielded and vented cable and excellent chemical compatibility

Flexible installation options with NPT connection to rigidly install in a pipe/conduit or use a A-625 hanging loop to attach a chain to remove from the installation

Minimal downtime with standard 72 hour lead time