Appleton Push Buttons – Erik Prayoga

Appleton™ AFAX20 BELT ALIGNMENT SW HAZ TA-2SPDT

Erik Prayoga — Mon, 22 Jun 2026 04:04:04 +0000

Appleton™ AFAX20 BELT ALIGNMENT SW HAZ TA-2SPDT

Specifications

Manufacturer	Appleton
Component	Belt Switch

Features

Used where alarm or computer interface capabilities are needed

Unit is used in pairs with one switch placed on each side of the conveyor belt. Recommended installation locates switches near the tail and head pulleys on conveyors 91.44 meters (300 feet) and longer

Post style or large roller style

AFAX Series is used in Class I and II areas where flammable vapors or highly combustible dusts are present

AFA Series has a gasketed cover rated for NEMA 3, 3R, 4, 4X

AFA10, AFA20, AFAX10, AFAX20: Each unit can be equipped with two micro switches to produce signals indicating belt misalignment at two deviation points. The first signal point could indicate small belt deviations by sounding an alarm. The second signal p

AFA10, AFA20, AFAX10, AFAX20: Operating arm has 247.65 mm (9.75#8221,) high and 31.75 mm (1.25#8221,) diameter roller and moves 90 degrees in both directions. Spring loaded arm returns to original position when belt is realigned.

AFA1, AFA2, AFAX1, AFAX2: Roller is 3.5#8221, high and actuates with 0.25#8221, travel. Unit should be mounted about 1#8221, from belt to eliminate false signals

Appleton™ AFUX033388 PULL CORD SW-HAZ-D4S 25# SPDT

Erik Prayoga — Mon, 22 Jun 2026 04:04:03 +0000

Appleton™ AFUX033388 PULL CORD SW-HAZ-D4S 25# SPDT

Specifications

Manufacturer	Appleton
Component	Control Switch

Features

AFU and AFUX conveyor control switches are available as pull cord type, left or right hand, single or double end

Ideal for use in steel mills, mining ore and coal handling operations, automotive and other assembly lines, warehouses, loading docks and other industrial processes

Can be used where alarm or computer interface capabilities are needed

Rugged torsion spring for positive actuation of flag arm

Stainless steel bushing may be easily reversed to increase or decrease actuation force, 6.8 or 11.3 kgs (15 or 25 lbs)

Maximum distance between switches should not exceed 61 meters (200 feet)

Two 1#8221

conduit openings (top and bottom)

Appleton™ AFUX033377 PULL CORD SW-HAZ D4S 15# SPDT

Erik Prayoga — Mon, 22 Jun 2026 04:04:01 +0000

Appleton™ AFUX033377 PULL CORD SW-HAZ D4S 15# SPDT

Specifications

Manufacturer	Appleton
Component	Control Switch

Features

AFU and AFUX conveyor control switches are available as pull cord type, left or right hand, single or double end

Ideal for use in steel mills, mining ore and coal handling operations, automotive and other assembly lines, warehouses, loading docks and other industrial processes

Can be used where alarm or computer interface capabilities are needed

Rugged torsion spring for positive actuation of flag arm

Stainless steel bushing may be easily reversed to increase or decrease actuation force, 6.8 or 11.3 kgs (15 or 25 lbs)

Maximum distance between switches should not exceed 61 meters (200 feet)

Two 1#8221

conduit openings (top and bottom)

Appleton™ SWD063S300E ATX SWITCH 63A 3-POLE

Erik Prayoga — Mon, 22 Jun 2026 04:04:00 +0000

Appleton™ SWD063S300E ATX SWITCH 63A 3-POLE

Specifications

Component	Switch
Manufacturer	Appleton

Features

Flameproof. Ideal for installation in chemical and petrochemical plants, refineries and other process industries

Available up to 690 Volts, and up to 250 Amps

Padlockable handle in position "O"

3 or 4-pole switch mechanism

NO-NC" early break auxiliary contact

Two threaded cable entries at bottom and one at top (M20 to M63)

Supplied with 1 x M20 blanking plug and 1 x M8 earth stud

Appleton™ AFUX033366 PULL CORD SW-HAZ-D4T 25# TCDB

Erik Prayoga — Mon, 22 Jun 2026 04:03:59 +0000

Appleton™ AFUX033366 PULL CORD SW-HAZ-D4T 25# TCDB

Specifications

Manufacturer	Appleton
Component	Control Switch

Features

AFU and AFUX conveyor control switches are available as pull cord type, left or right hand, single or double end

Ideal for use in steel mills, mining ore and coal handling operations, automotive and other assembly lines, warehouses, loading docks and other industrial processes

Can be used where alarm or computer interface capabilities are needed

Rugged torsion spring for positive actuation of flag arm

Stainless steel bushing may be easily reversed to increase or decrease actuation force, 6.8 or 11.3 kgs (15 or 25 lbs)

Maximum distance between switches should not exceed 61 meters (200 feet)

Two 1#8221

conduit openings (top and bottom)

Appleton™ AFAX2 BELT ALIGNMENT SW HAZ 16-2DPDT

Erik Prayoga — Mon, 22 Jun 2026 04:03:57 +0000

Appleton™ AFAX2 BELT ALIGNMENT SW HAZ 16-2DPDT

Specifications

Manufacturer	Appleton
Component	Belt Switch

Features

Used where alarm or computer interface capabilities are needed

Post style or large roller style

AFAX Series is used in Class I and II areas where flammable vapors or highly combustible dusts are present

AFA Series has a gasketed cover rated for NEMA 3, 3R, 4, 4X

AFA1, AFA2, AFAX1, AFAX2: Roller is 3.5#8221, high and actuates with 0.25#8221, travel. Unit should be mounted about 1#8221, from belt to eliminate false signals

Appleton™ AFUX033355L PULL CORD SW-HAZ-D4T 15# TCDB

Erik Prayoga — Mon, 22 Jun 2026 04:03:57 +0000

Appleton™ AFUX033355L PULL CORD SW-HAZ-D4T 15# TCDB

Specifications

Manufacturer	Appleton
Component	Control Switch

Features

AFU and AFUX conveyor control switches are available as pull cord type, left or right hand, single or double end

Ideal for use in steel mills, mining ore and coal handling operations, automotive and other assembly lines, warehouses, loading docks and other industrial processes

Can be used where alarm or computer interface capabilities are needed

Rugged torsion spring for positive actuation of flag arm

Stainless steel bushing may be easily reversed to increase or decrease actuation force, 6.8 or 11.3 kgs (15 or 25 lbs)

Maximum distance between switches should not exceed 61 meters (200 feet)

Two 1#8221

conduit openings (top and bottom)

Appleton™ SWD100S300F ATX SWITCH 100A 3-POLE

Erik Prayoga — Mon, 22 Jun 2026 04:03:55 +0000

Appleton™ SWD100S300F ATX SWITCH 100A 3-POLE

Specifications

Component	Switch
Manufacturer	Appleton

Features

Flameproof. Ideal for installation in chemical and petrochemical plants, refineries and other process industries

Available up to 690 Volts, and up to 250 Amps

Padlockable handle in position "O"

3 or 4-pole switch mechanism

NO-NC" early break auxiliary contact

Two threaded cable entries at bottom and one at top (M20 to M63)

Supplied with 1 x M20 blanking plug and 1 x M8 earth stud

Appleton™ AFUX033355 PULL CORD SW-HAZ-D4T 15# TCDB

Erik Prayoga — Mon, 22 Jun 2026 04:03:55 +0000

Appleton™ AFUX033355 PULL CORD SW-HAZ-D4T 15# TCDB

Specifications

Manufacturer	Appleton
Component	Control Switch

Features

AFU and AFUX conveyor control switches are available as pull cord type, left or right hand, single or double end

Ideal for use in steel mills, mining ore and coal handling operations, automotive and other assembly lines, warehouses, loading docks and other industrial processes

Can be used where alarm or computer interface capabilities are needed

Rugged torsion spring for positive actuation of flag arm

Stainless steel bushing may be easily reversed to increase or decrease actuation force, 6.8 or 11.3 kgs (15 or 25 lbs)

Maximum distance between switches should not exceed 61 meters (200 feet)

Two 1#8221

conduit openings (top and bottom)

Appleton™ SWD125S300G ATX SWD SWITCH “D” 3X125A

Erik Prayoga — Mon, 22 Jun 2026 04:03:54 +0000

Appleton™ SWD125S300G ATX SWD SWITCH "D" 3X125A

Specifications

Component	Switch
Manufacturer	Appleton

Features

Flameproof. Ideal for installation in chemical and petrochemical plants, refineries and other process industries

Available up to 690 Volts, and up to 250 Amps

Padlockable handle in position "O"

3 or 4-pole switch mechanism

NO-NC" early break auxiliary contact

Two threaded cable entries at bottom and one at top (M20 to M63)

Supplied with 1 x M20 blanking plug and 1 x M8 earth stud