Busways – Erik Prayoga

Appleton™ APPFS24C42M2 PANEL BOARD FACTORY SEALED

Erik Prayoga — Mon, 22 Jun 2026 17:25:26 +0000

Appleton™ APPFS24C42M2 PANEL BOARD FACTORY SEALED

Specifications

Component	Panelboard
Manufacturer	Appleton

Features

Explosionproof, dust-ignitionproof, watertight. Features a precision machined flame path between body and cover and an O-ring gasket to insure watertight integrity.

Factory sealed

no external seals are required for most branch circuits. All conduits must be sealed adjacent to enclosure for Class I, Division 1, Groups B and C

100 Amp or 225 Amp main lug

Up to 100 Amp backfed main breaker available with main lug chassis

Up to 225 Amp main breaker available with main breaker chassis

Permits selection of 1-, 2- or 3-pole breakers

Breaker operators included as standard. Breaker operators can be padlocked in the ON or OFF position

Breakers are housed in the panel section and prewired to maximum circuit capacity, then wired to numbered terminals in the wiring compartment

Provisions for 12, 18, 24, 30, 36 and 42 circuit 1-pole chassis. Chassis assembles with mains at top (bottom optional)

Factory installed ground and neutral bar as standard

Terminal compartment is interconnected to panel section with sealing hubs, unions and poured with sealing compound

All panelboards are supplied with Cutler-Hammer B interiors

Schneider Electric VA650B4014S automatic PowerLogic PFC Smart Capacitor bank, 650kvar

Erik Prayoga — Mon, 22 Jun 2026 17:25:25 +0000

automatic PowerLogic PFC Smart Capacitor bank, 650kvar CB NE1 DR4.2 480V 60Hz

Specifications

Manufacturer	Schneider Electric
Component	Capacitors Bank

Features

Lower operating and capital costs

Reduce capital expenses up to 30%

Reduce reactive energy billing penalties and lower operating expenses up to 10%

Improve power system and equipment reliability up to 18%

Reduce CO2 emissions by up to 95kg for every kvar of power factor installed

Fully type tested in compliance with IEC/EN 61439-1 & IEC and CSA 22.2 NO 190, UL810 & UL 508a

Configurable overload and short-circuit protection

Thermal monitoring devices and overheating protections

Reliability and durability

Best-in-class Schneider Electric components inside

Easy maintenance on-site or remote thanks to smart monitoring functions and Modbus communication

Multiple alarm functions (temperature, harmonics, voltage, overload, etc

Future-ready, EcoStruxure-enabled connected product

Easy to install thanks to compactness and room for connections

Easy to commission thanks to pre-settings and smart power factor controller VarPlus Logic

Configurable product and options available

Schneider Electric HVL515BGL – Switchgear, HVL, duplex, 600A, 15kV, 10E to 400E boric acid fuse, transformer disconnect, left, NEMA 1 – 90″ x 76″ x 54.5″ (HxWxD)

Erik Prayoga — Mon, 22 Jun 2026 17:25:24 +0000

Schneider Electric HVL515BGL – Switchgear, HVL, duplex, 600A, 15kV, 10E to 400E boric acid fuse, transformer disconnect, left, NEMA 1 – 90" x 76" x 54.5" (HxWxD)

Specifications

Manufacturer	Schneider Electric
Component	Switchgear
Voltage	15 Kv

Features

Engineered for reliable operation in harsh electrical environments

Compatible with medium-voltage distribution and protection architectures

Supports critical power distribution and electrical infrastructure applications

Designed for dependable medium-voltage system performance and operational safety

Schneider Electric HVL515BGR – Switchgear, HVL, duplex, 600A, 15kV, 10E to 400E boric acid fuse, transformer disconnect, right, NEMA 1 – 90″ x 76″ x 54.5″ (HxWxD)

Erik Prayoga — Mon, 22 Jun 2026 17:25:24 +0000

Schneider Electric HVL515BGR – Switchgear, HVL, duplex, 600A, 15kV, 10E to 400E boric acid fuse, transformer disconnect, right, NEMA 1 – 90" x 76" x 54.5" (HxWxD)

Specifications

Manufacturer	Schneider Electric
Component	Switchgear
Voltage	15 Kv

Features

Engineered for reliable operation in harsh electrical environments

Compatible with medium-voltage distribution and protection architectures

Supports critical power distribution and electrical infrastructure applications

Designed for dependable medium-voltage system performance and operational safety

Schneider Electric VA700B4014S automatic PowerLogic PFC Smart Capacitor bank, 700kvar

Erik Prayoga — Mon, 22 Jun 2026 17:25:23 +0000

automatic PowerLogic PFC Smart Capacitor bank, 700kvar CB NE1 DR4.2 480V 60Hz

Specifications

Manufacturer	Schneider Electric
Component	Capacitors Bank

Features

Lower operating and capital costs

Reduce capital expenses up to 30%

Reduce reactive energy billing penalties and lower operating expenses up to 10%

Improve power system and equipment reliability up to 18%

Reduce CO2 emissions by up to 95kg for every kvar of power factor installed

Fully type tested in compliance with IEC/EN 61439-1 & IEC and CSA 22.2 NO 190, UL810 & UL 508a

Configurable overload and short-circuit protection

Thermal monitoring devices and overheating protections

Reliability and durability

Best-in-class Schneider Electric components inside

Easy maintenance on-site or remote thanks to smart monitoring functions and Modbus communication

Multiple alarm functions (temperature, harmonics, voltage, overload, etc

Future-ready, EcoStruxure-enabled connected product

Easy to install thanks to compactness and room for connections

Easy to commission thanks to pre-settings and smart power factor controller VarPlus Logic

Configurable product and options available

Schneider Electric VA750M4014S automatic PowerLogic PFC Smart Capacitor bank, 750kvar

Erik Prayoga — Mon, 22 Jun 2026 17:25:22 +0000

automatic PowerLogic PFC Smart Capacitor bank, 750kvar DR4.2 MLO NE1 480V 60Hz

Specifications

Manufacturer	Schneider Electric
Component	Capacitors Bank

Features

Lower operating and capital costs

Reduce capital expenses up to 30%

Reduce reactive energy billing penalties and lower operating expenses up to 10%

Improve power system and equipment reliability up to 18%

Reduce CO2 emissions by up to 95kg for every kvar of power factor installed

Fully type tested in compliance with IEC/EN 61439-1 & IEC and CSA 22.2 NO 190, UL810 & UL 508a

Configurable overload and short-circuit protection

Thermal monitoring devices and overheating protections

Reliability and durability

Best-in-class Schneider Electric components inside

Easy maintenance on-site or remote thanks to smart monitoring functions and Modbus communication

Multiple alarm functions (temperature, harmonics, voltage, overload, etc

Future-ready, EcoStruxure-enabled connected product

Easy to install thanks to compactness and room for connections

Easy to commission thanks to pre-settings and smart power factor controller VarPlus Logic

Configurable product and options available

Schneider Electric HVLCCB20505DGR – Switchgear, HVLcc, fused, 4.76kV, 600A, 20.00in W, bottom entry, transformer on right – 90″ x 40″ x 37.25″ (HxWxD)

Erik Prayoga — Mon, 22 Jun 2026 17:25:21 +0000

Schneider Electric HVLCCB20505DGR – Switchgear, HVLcc, fused, 4.76kV, 600A, 20.00in W, bottom entry, transformer on right – 90" x 40" x 37.25" (HxWxD)

Specifications

Manufacturer	Schneider Electric
Component	Switchgear
Voltage	4.76 Kv

Features

Compatible with medium-voltage power control architectures

Engineered for dependable operation in demanding electrical environments

Supports safe maintenance and operational procedures

Suitable for critical electrical infrastructure and distribution networks

Eaton 83E9213 – Classic molded case switch

Erik Prayoga — Mon, 22 Jun 2026 17:25:21 +0000

Eaton 83E9213 – Classic molded case switch, HNC, Molded case switch, Electronic LS trip type, Three-pole, 1200A, 600 Vac, 24 Vdc

Specifications

Component	Accessories
Manufacturer	Eaton
Sub Component	Classic Molded Case Switch

Schneider Electric VA800M4014S automatic PowerLogic PFC Smart Capacitor bank, 800kvar

Erik Prayoga — Mon, 22 Jun 2026 17:25:21 +0000

automatic PowerLogic PFC Smart Capacitor bank, 800kvar DR4.2 MLO NE1 480V 60Hz

Specifications

Manufacturer	Schneider Electric
Component	Capacitors Bank

Features

Lower operating and capital costs

Reduce capital expenses up to 30%

Reduce reactive energy billing penalties and lower operating expenses up to 10%

Improve power system and equipment reliability up to 18%

Reduce CO2 emissions by up to 95kg for every kvar of power factor installed

Fully type tested in compliance with IEC/EN 61439-1 & IEC and CSA 22.2 NO 190, UL810 & UL 508a

Configurable overload and short-circuit protection

Thermal monitoring devices and overheating protections

Reliability and durability

Best-in-class Schneider Electric components inside

Easy maintenance on-site or remote thanks to smart monitoring functions and Modbus communication

Multiple alarm functions (temperature, harmonics, voltage, overload, etc

Future-ready, EcoStruxure-enabled connected product

Easy to install thanks to compactness and room for connections

Easy to commission thanks to pre-settings and smart power factor controller VarPlus Logic

Configurable product and options available

Schneider Electric HVLCCB20505DGL – Switchgear, HVLcc, fused, 4.76kV, 600A, 20.00in W, bottom entry, transformer on left – 90″ x 40″ x 37.25″ (HxWxD)

Erik Prayoga — Mon, 22 Jun 2026 17:25:20 +0000

Schneider Electric HVLCCB20505DGL – Switchgear, HVLcc, fused, 4.76kV, 600A, 20.00in W, bottom entry, transformer on left – 90" x 40" x 37.25" (HxWxD)

Specifications

Manufacturer	Schneider Electric
Component	Switchgear
Voltage	4.76 Kv

Features

Compatible with medium-voltage power control architectures

Engineered for dependable operation in demanding electrical environments

Supports safe maintenance and operational procedures

Suitable for critical electrical infrastructure and distribution networks