ABB Circuit Breaker Bases & Accessories – Erik Prayoga

ABB SPST024R – Shunt Trip

Erik Prayoga — Sun, 21 Jun 2026 11:53:47 +0000

ABB SPST024R – The Shunt Trip Accessory Is An Electronic Module, Which Provides Remote Control Capability To Open The Circuit Breaker. When Activated, The Shunt Trip Module Sends A Signal To The Trip Unit To Open The Breaker. This Allows The Trip Unit To Record, Display, Distinguish And Communicate (In Microversatrip™ Pm Trip Units) That The Opening Event Was Initiated By The Shunt Trip Device. The Shunt Trip Is Continuously Rated And Requires No Cut-Off Switch. When Energized, The Shunt Trip Supplies +24vdc Power To The Trip Unit To Power The Display

Specifications

Manufacturer	ABB
Component	Shunt Trip

Features

The shunt trip accessory is an electronic module which provides remote control capability to open the circuit breaker

When activated, the shunt trip sends a signal to the trip unit to open the breaker

This allows the trip unit to record, display, and communicate (in MicroVersaTrip PM trip units) that the opening event was initiated by the shunt trip device

The shunt trip is continuously rated and requires no cut-off switch

When energized, the shunt trip supplies +24 Vdc power to the trip unit to power the display

024R Amps 400 A

ABB ZE1FLG54DK Flange

Erik Prayoga — Sun, 21 Jun 2026 11:53:46 +0000

ABB ZE1FLG54DK – IP54 FLANGE PROTECTION WITH KEYS LOCK SEVERAL E1.2/3-XT7M

Specifications

Manufacturer	ABB
Component	Flange

ABB TE100CS – Enclosure

Erik Prayoga — Sun, 21 Jun 2026 11:53:45 +0000

ABB TE100CS – Enclosure Nema 4/4x 100a Ted

Specifications

Manufacturer	ABB
Component	Enclosure

Features

Designed for commercial and industrial applications where safety, high performance and continuity of service are essential

Listed to UL standard 98 enclosed and dead front switches

Suitable for use as service equipment when installed in accordance with the National Electrical Code

Certified to CSA standard 22.2 no

4-04 enclosed and dead front switches

Meets or exceeds NEMA KS1 standard for enclosed switches, type HD. Fusible and non-fusible switches available (consult BuyLog for interrupt ratings). Quick-make, quick-break mechanism

60/75 C conductor rating

Full cover interlocks

TE100CS

ABB SPRAILS – Rail Kit

Erik Prayoga — Sun, 21 Jun 2026 11:53:45 +0000

ABB SPRAILS – Rail Kit This Field Installable Rail Kit May Be Used To Shorten The Two Standard Oem Substructure Rails By 3-1/2 Inches.

Specifications

Manufacturer	ABB
Component	Rail Kit

ABB 1SDA065851R1 Spare Part

Erik Prayoga — Sun, 21 Jun 2026 11:53:44 +0000

KIT FRO.SHI.OPER.MECH.T8 3p

Specifications

Manufacturer	ABB
Component	Spare Part

ABB TSLUG20 – Lug Kit

Erik Prayoga — Sun, 21 Jun 2026 11:53:43 +0000

ABB TSLUG20 – Lug Kits Kits Accept Cu/Ai Wire And Are Suitable For Direct Mounting To The Breaker. When Ordering Type Tplug Kits, Order One Kit Per Line Or Load Pole. Example: A Complete Set Of Lugs For The Line Side Of An 800a Frame, 400a Trip Breaker Would Be Qty 3-Tplug106 Lugs. When Ordering Tslug Kits Order One Kit Per Line Or Load Side; Tslug Kits Require Use Of T-Studs. Example: A Complete Set Of Lugs For A 3000a Frame, 2500a Trip Breaker Would Be Qty 1-Tslug25. T-Studs Would Also Be Required.

Specifications

Manufacturer	ABB
Component	Lug Kit

Features

Kit accepts Cu/Al wire and requires the use of T-studs

UG20 Amps 2000 A

ABB SPK4R – Key Lock

Erik Prayoga — Sun, 21 Jun 2026 11:53:42 +0000

ABB SPK4R – Pbii Kirk Key Locks (4) Provision

Specifications

Manufacturer	ABB
Component	Key Lock

Features

The key interlock provision enables the user to mount a one- to four-cylinder, narrow faced, Kirk-type FN or Superior customer-supplied lock on the face of the breaker

This accessory provides mounting for key interlocks that are furnished by the customer

The key interlock provision works in conjunction with the padlock provision

The key interlock extends through the padlock hasp when the key is turned to the key removal or bolt extended position

Additionally, the accessory provides a hasp for mounting three padlocks with 1/4" to 3/8" diameter shanks.

ABB AMC4FJFP – Mounting Hardware

Erik Prayoga — Sun, 21 Jun 2026 11:53:41 +0000

ABB AMC4FJFP – Amc4fjfp Spectra Series Mccb Mounting Module

Specifications

Manufacturer	ABB
Component	Mounting Hardware

ABB TPLUGA16 – Lug Adapter

Erik Prayoga — Sun, 21 Jun 2026 11:53:41 +0000

ABB TPLUGA16 – Lug Adapter Kits Kits Pre-Mount To Bus Structure Allowing Cabling Or Bussing To Be Completed Prior To Breaker Mounting. Accepts Either Lugs Or Crimp-Type Connector Terminals. Kit Includes Adapter And Hardware For Either A Three-Pole Line-Side, Or A Three-Pole Load-Side Connection. (Lugs Not Included).

Specifications

Manufacturer	ABB
Component	Lug Adapter

Features

Kits pre-mount to bus structure allowing cabling or bussing to be completed prior to breaker mounting

Accepts either lugs or crimp type connector terminals

Kit includes adapter and hardware for either a three-pole, line-side, or a three-pole load-side connection

(Lugs not included.) GA16 Frame Rating Amps 800

ABB SPS30FCC – T Studs

Erik Prayoga — Sun, 21 Jun 2026 11:53:40 +0000

ABB SPS30FCC – T-Studs Mount Directly To The Breaker, And Can Be Rotated For Either Vertical Or Horizontal Bus Connection. 4000 Ampere T-Studs Are For Vertical Bus Bars Only. Product Number Includes One Stud. Both Copper And Aluminum T-Studs Are Tin-Plated.

Specifications

Manufacturer	ABB
Component	T Studs

Features

T-studs mount directly to the breaker and can be rotated for either vertical or horizontal bus connection

4000 ampere T-studs are for vertical bus bars only

Catalog number includes one stud

Both copper and aluminum T-studs are tin plated

0FCC Amps 225 A